Round Tapered Smooth Steel Poles – Ships from DE
- Please refer to chart ordering guide on spec sheet for all models
- AVAILABILITY:
In stock and ships from DE
Pickup is available.
- Shaft:
The pole shaft is a one-piece assembly conforming to ASTM A595 Grade A or A572
Grade 55 with a constant linear taper of 0.14 in/ft.
- Pole Top:
Pole is provided with either a tenon top or drilled for fixture mounting. A removable pole
cap is provided for poles receiving drilling patterns for side-mount luminaire arm
assemblies. Other pole top options include pole cap only (PC) or plain top (PL) which is
typical when the pole top diameter matches the necessary slip fit dimensions.
- Handhole:
A reinforced handhole with grounding provision is provided at 1’-6” from the base end of
the pole assembly. Each handhole includes an easy to install, self-contained Swing
Latch handhole cover assembly. U.S. Patent Swing Latch cover is fabricated from
durable polycarbonate/ABS blend plastic. All pole assemblies are provided with a
2.50” x 5.00” rectangular handhole. Handhole dimensions are nominal.
- Base Cover:
A two-piece full base cover fabricated from ABS plastic is provided with each pole
assembly. Vivid Leds reserves the right to provide a two-piece steel full base cover on
some applications depending upon the finish requirement and/or pole base diameter.
Nut covers an be substituted on most models. Additional base cover options, including
the dart round (DT) cast aluminum cover, are available (adder).
- Anchor Bolts:
Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts
and two flat washers. Bolts have an “L” bend on one end and are galvanized a
minimum of 12” on the threaded end.
- Hardware:
All structural fasteners are galvanized high strength carbon steel. All non-structural
fasteners are galvanized or zinc-plated carbon steel or stainless steel.
