Square Straight Smooth Steel Pole 10′ – 40′ Ships from DE
- Please refer to chart ordering guide on spec sheet for all models
- AVAILABILITY:
In stock and ships from DE
Pickup is available.
- Shaft:
The pole shaft is fabricated from hot rolled welded steel tubing of one-piece construction
with a minimum yield strength of 55 KSI.
- Pole Top:
A removeable pole cap is provided for poles receiving drilling patterns for side-mount
luminaire arm assemblies. For top mount luminaires and/or bracket, consult factory.
Other pole top options include pole cap only (PC) or plain top (PL) which is typical when
the pole top diameter matches the necessary slip fit dimensions.
- Handhole:
A reinforced handhole with grounding provision is provided at 1’-6” from the base end of
the pole assembly. Each handhole includes an easy to install, self-contained Swing
Latch handhole cover assembly. U.S. Patent Swing Latch cover is fabricated from
durable polycarbonate/ABS blend plastic. All pole assemblies are provided with a
2.50” x 5.00” rectangular handhole. Handhole dimensions are nominal.
- Base Cover:
A two-piece full base cover fabricated from ABS plastic is provided with each pole
assembly. Additional base cover options, including the dart round (DT) cast aluminum
cover, are available (adder).
- Anchor Bolts:
Anchor bolts conform to ASTM F1554 Grade 55 and are provided with two hex nuts and
two flat washers. Bolts have an “L” bend on one end and are galvanized a minimum of
12” on the threaded end.
- Hardware
All structural fasteners are galvanized high strength carbon steel. All non-structural
fasteners are galvanized or zinc-plated carbon steel or stainless steel.
- Finish – Super Durable Polyester TGIC Powder Coat:
• Standard finishes: high gloss black, textured black, high gloss white, medium
bronze, dark bronze, green, gray, silver metallic
• Custom and Marine-grade finishes are available. All RAL colors are available to
match (adder).
