Government Facilities Lighting

The Vivid Leds VEGA2 fixtures are USA qualified for your government project. Explore the VEGA2 LED high bay, LED flood, or surface mount fixture for high bays. The VEGA2 XL goes up to 900W LED for larger LED area lighting projects.

Architekt GP

The Architekt GP solar LED post top luminaire is an all-in-one solution, with a low profile design and an integrated smart controller. This post top light fixture is ideal for parks, courtyards, villas, residences, pathways, and many other applications. It is designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times.
The Architekt GP can operate 3-5 continuous rainy days in Intelligent mode.

Alume BL

This attractive and newly redesigned bollard features an aluminum alloy housing. It provides corrosion and vandal resistance that is not only ideal for lighting pedestrial walkways, but also for accenting the exterior ground of office and apartment buildings, hotels and parks. A solid foundation and driver withstands the elements even in the worst weather conditions. Features a 360 degree surround lens, CCT selectable, and motion sensor.

Architekt OV

The Architekt OV solar LED post top luminaire is an all-in-one solution, with a low profile design and an integrated smart controller. This post top light fixture is ideal for parks, courtyards, villas, residences, pathways, and many other applications. It is designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times.
The Architekt OV can operate 3-5 continuous rainy days in Intelligent mode.

Architekt SP

The Architekt SP solar LED post top luminaire is an all-in-one solution, with a low profile design and an integrated smart controller. This post top light fixture is ideal for parks, courtyards, villas, residences, pathways, and many other applications. It is designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times.
The Architekt SP can operate 3-5 continuous rainy days in Intelligent mode.

Architekt RP

The Architekt RP solar LED post top luminaire is an all-in-one solution, with a low profile design and an integrated smart controller. This post top light fixture is ideal for parks, courtyards, villas, residences, pathways, and many other applications. It is designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times.
The Architekt RP can operate 3-5 continuous rainy days in Intelligent mode.

Architekt RB

The Architekt RB solar LED round bollard is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt RB has temperature compensation and lightning protection, reverse polarity protection and other functions such as light control, and lighting 3-5 during rainy days.

Architekt SB

The Architekt SB solar LED square bollard is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt SB has temperature compensation and lightning protection, reverse polarity protection and other functions such as light control, and lighting 3-5 during rainy days.

Architekt SW

The Architekt SW solar LED square wall mount light is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt SW has temperature compensation and lightning protection, reverse polarity protection andother functions such as light control, and lighting 3-5 during rainy days.

Architekt RW

The Architekt RW solar LED round wall mount light is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt RW has temperature compensation and lightning protection, reverse polarity protection and other functions such as light control, and lighting 3-5 during rainy days.

Architekt FC

The Architekt FC solar LED full cutoff wall mount fixture is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt FC has temperature compensation and lightning protection, reverse polarity protection and
other functions such as light control, and lighting 3-5 during rainy days.

Architekt SC

The Architekt SC solar LED semi-cutoff wall mount fixture is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt SC has temperature compensation and lightning protection, reverse polarity protection and
other functions such as light control, and lighting 3-5 during rainy days.

Architekt SR

The Architekt SR solar LED street light is an all-in-one solution, with a low profile design and an integrated smart controller. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times. The Architekt SR can operate 3-5 continuous rainy days in Intelligent mode.

Alume SR

The Alume SR solar LED street light is an all-in-one solution, with a low profile design, and an integrated photocell and motion sensor with smart controller. Designed for remote areas 12’ to 16’ in height, where no electricity needed. The deep cycle battery can charge and discharge over 500 times. The Alume SR can operate four continuous rainy days in Intelligent mode.

Twilight Z10

The Twilight Z10 offers IP69K high temperature and high pressure washdown that applies to even the most difficult applications such as wash bays, automated car washes, fountains, and other underwater applications. With a IK09 impact resitant grade aluminum alloy housing, Bayer PC tube, and a variety of CCT’s and beam angles, and adjustable mounting brackets, the Twilight Z10 shines above the rest.

Xsite Bollard 14

The Xsite series is a ARRA and BAA compliant bollard using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.

Focus C1D2 LV3

The Focus Class 1, Division 2 explosion proof hazardous location luminaire is available with a clear tempered glass lens. Typical lighting applications include industrial facilities, oil, gas, painting facilities, manufacturing, and auto service facilities. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays, each aspect was considered to ensure many years of service.

Industry Max

This LED high bay is designed for high ceiling industrial applications up to 80 feet that require maximum delivered footcandles with low maintenance and long life. The fixture is available in wide and narrow beam optics with a choice of lenses designed to replace HID lighting systems up to 1500w. Typical applications are high ceiling industrial, manufacturing, military and large aircraft hangar facilities.
Suitable for 40 to 80 foot mounting heights based on uniformity requirements.

Industry SQ

This LED high bay and aisle lighter is available with a choice of four lenses designed to replace HID lighting systems up to 1000w MH. Typical high bay lighting applications include warehouses, manufacturing facilities, gymnasiums, indoor sports facilities, and retail and big box store lighting. Suitable for 16 to 30 foot mounting heights based on light level and uniformity requirements.

Industry SQR

This LED low profile 16” high bay is available with a choice of five lenses designed to replace HID lighting systems up to 400w MH. Typical high bay lighting applications include warehouses, manufacturing facilities, gymnasiums, indoor sports facilities, and retail and big box store lighting. Suitable for 10 to 30 foot mounting heights based on light level and uniformity requirements.

Industry GC

The Industry series is a cutoff wall pack luminaire available with a choice of optical distributions designed to replace HID lighting systems up to 175w. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 15 feet can be achieved.

Axis 4

The Axis series is a Round Back Architectural Flood light luminaire available with a choice of knuckle or slip fitter mounting configurations, and a medium flood optical distribution designed to replace HID lighting systems up to 175w. Mounting can be accomplished using ground attachment accessories and to heights of 20 feet based on light level and uniformity requirements.

Axis 3

The Axis series is available with a choice of yoke or slip fitter mounting configurations and medium flood optical distribution designed to replace HID lighting systems up to 400w HID. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights up to 25 feet based on uniformity requirements.

Axis 2

The Axis series is available with a choice of knuckle or slip fitter mounting configurations and two optical distributions designed to replace HID lighting systems from 100w to 175w HID. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting up to heights of 20 feet based on light level and uniformity requirements.

Axis 1

The Axis series is available with a knuckle mounting configuration and medium flood distribution designed to replace HID lighting systems up to 100w MH or HPS. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished using ground attachment accessories to heights up to 16 feet.

Commerce SL

This luminaire is designed to replace HID lighting systems up to 70w HID. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished using ground attachment accessories and up to heights of 12 feet based on light level and uniformity requirements.

Multi GI HP

The Multi GI HP is a ARRA compliant multi-application luminaire using the latest Samsung LEDS. It is available with a wide choice of optical distributions designed to replace up to 1500w HID. Typical applications include auto dealerships, retail centers, industrial parks, schools, public transit and airports, office buildings and medical facilities. Mounting heights of 20 to 50 feet can meet requirements.

Multi GI

The Multi GI is available in two wattages with a wide choice of mounting configurations and optical distributions designed to replace HID lighting systems from 150w to 1000w MH or HPS. Typical applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 16 to 35 feet can be achieved.

Axis XP

The Axis series is a ARRA compliant flood/spot/wall luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.

Xsite Sconce

The Xsite series is a ARRA and BAA compliant wall sconce using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.

Focus FC

The Focus FC up and down architectural wall luminaire is available with an IES Type V distribution designed to replace HID lighting systems from 150w to 250w MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 12 to 20 feet can be used.

Axis Sconce

The Axis Sconce Series cutoff architectural wall mount provides controlled down lighting with a uniform distribution designed to replace compact fluorescent and HID lighting systems up to 50w MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports. Mounting heights of 8 to 12 feet can be used based on light level requirements.

Industry SC

The Industry series is a ARRA compliant wall mount luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.

Industry EL

Industry SR

The Industry series is a general purpose wall pack luminaire provides optically controlled wide spread light distribution designed to replace HID lighting systems up to 70w. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings, apartment complexes and medical facilities. Mounting heights of 8 to 12 feet.

Axis Bullet Pendant

The Axis series is available with a swivel pendant and is designed with three optical outputs to replace HID lighting systems up to 100w. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished up to heights of 12 feet.

Design CN

The Design series is a vandal resistant garage lighter luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.

Design SB

The Design series canopy is available for surface or pendant mounting configurations with an optical distribution designed specifically to replace HID lighting systems up to 175w. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 12 to 20 feet can be achieved.

Architekt XP

The Architekt XP garage square luminaire with optional integral sensor is available in three wattages with an optical distribution designed to replace HID lighting systems up to 175w MH or HPS. Typical parking garage applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 16 feet can be used.

Design FT

The Design series is garage luminaire with optional integral sensor is available with an optical distribution designed to replace HID lighting systems up to 175w. Typical parking garage applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 16 feet can be achieved.

Axis Pillar Top

The Axis Pillar Top luminaires with UV-stabilized polycarbonate lenses and sealed optical compartments are designed to replace HID lighting systems up to 70w MH or HPS. These fixtures are designed for use on pillars, columns, fences, railings and other outdoor structures. Ideal for use in retail centers, schools and universities, office buildings, apartments and condominium complexes, and residential areas.

Axis Trail

The Axis Trail Series provides provides full cutoff lighting for outdoor path, walkways and landscape areas using wide spread optics designed to replace outdated Halogen and Compact Fluorescent lighting systems. These fixtures are ideal for retail centers, restaurants, hotels, schools and universities, public transit and airports, office buildings and medical facilities.

Axis Path

The Axis Path Series provides full cutoff lighting for outdoor path, walkways and landscape areas using wide spread optics designed to replace outdated Halogen and Compact Fluorescent lighting systems. When mounted on walls between 8 to 20 feet, the fixture provides accent wall wash pattern illumination. A stake mount version is also available for line or low voltage landscape accent lighting.

Axis Bullet C2

The Axis series flood light luminaire is available with a knuckle mounting feature and is designed to replace HID lighting systems up to 50w MH or HPS. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting up to heights of 12 feet based on light level and uniformity requirements.

Axis Bullet C1

The Axis series is available with a knuckle mount feature, swivel pendant, post top fitter or stake and is designed with three optical outputs to replace HID lighting systems up to 100w. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished up to heights of 12 feet.

Commerce Bell

The Commerce Bell Pendant is available in a Type V distribution with two lens options designed to replace HID lighting systems up to 250w MH or HPS. The fixture mounts to a pole single arm, pole double arm, or wall mount single arm. Typical area lighting applications include parking areas, walkways, and pedestrian public spaces. Mounting heights of 12 to 30 feet can be used based on light level and uniformity requirements.

Architekt RT

The Architekt RT architectural open large round post top is available in Type III or V distributions with two lens options designed to replace HID lighting systems up to 2500w MH or HPS. The fixture mounts to a pole top tenon. Typical area lighting applications include parking areas, walkways, and street lighting applications. Mounting heights of 12 to 20 feet can be used based on light level and uniformity requirements.

Focus Area

The Focus Area Series pole mount luminaire is available with clear or LumaLens lenses and open door frame designed to replace HID lighting systems up to 400w MH or HPS. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 18 to 30 feet can be used based on light level and uniformity requirements.

Architekt RP

The Architekt RP architectural pole or wall mount is available in Type II, III, IV or V distributions designed to replace HID lighting systems up to 400w MH or HPS. Typical area lighting applications include parking areas, walkways, and street lighting applications. Mounting heights of 12 to 30 feet can be used based on light level and uniformity requirements.

Architekt AR

The Architekt AR Architectural open small pole or wall mount is available in a Type V distribution designed to replace HID lighting systems up to 70w MH or HPS. Typical area lighting applications include parking areas, walkways, and street lighting applications. Mounting heights of 8 to 12 feet can be used based on light level and uniformity requirements.

Xsite Bollard AM4

The Xsite Bollard AM4 Series flat top with cone and a 270 degree glare shield, and are certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore, requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.

Xsite Bollard AM3

The Xsite Bollard AM3 Series round flat top with louvers and a 270 degree glare shield, and are certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore, requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.

Xsite Bollard AM2

The Xsite Bollard AM2 Series round dome top with cone and a 270 degree glare shield, and are certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore, requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.

Xsite Bollard AM1

The Xsite Bollard AM1 Series round dome top with louvers and a 270 degree glare shield, and are certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore, requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.

Commerce VSA

The Commerce VSA series is a wall and ceiling mount fixture with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be achieved.

Commerce VSS

The Commerce VSS series is a wall and ceiling mount fixture with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be achieved.

Industry CGA

The Industry CGA series is available with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be used based on light level and uniformity.

Industry GCA

The Industry GCA series is available with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be used based on light level and uniformity.

Axis XA1

The Axis XA1 series is available with a shielded IES Type II distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be used based on light level and uniformity.

Design FTA

The Design FTA series is available with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be used based on light level and uniformity.

Architekt AR

The Architekt AR series is available in three wattages with horizontal cutoff mounting configurations and a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.

Array HBL

The Array HBL linear high bay is suitable for commercial, retail and institutional applications including gymnasiums, factories and warehouses. The wattage and CCT can be changed by a switch selection on the controller that provides quick and easy on-the-spot reconfiguring. The threaded conduit support wires coming from the knockout make for easier wire connections.

Array HBR

The Array HBR is a compact, round, budget-friendly high bay that combines great performance with premium aesthetics. The stylish exterior design is very adaptable and can be seamlessly integrated into various environments without being obtrusive. The unique structural design provides maximum durability and reliability, while supporting hook or pendant installation methods.

Array CP

The Array CP is a cost-effective, energy-saving LED light fixture for surface mount applications in commercial buildings, retail, and educational facilities. The housing provides excellent heat dissipation which prolongs it’s lifespan. The precision-designed optical lens reduces glare, improves optical performance and provides comfortable lighting. Includes an external quick-mounting plate for quick and easy installation.

Twilight Z9 SC

The Twilight Z9 offers a basic solution that applies to even the most difficult applications. With a IK07 impact resitant grade aluminum alloy housing, tempered glass cover, IP66 waterproof rating, a variety of CCT’s and beam angles, and adjustable mounting brackets, the Twilight Z9 shines above the rest.

Commerce VP

The Commerce series is a vaporproof fixture with a choice of mounting
configurations designed to replace HID lighting systems up to 175w MH
or HPS. This vapor resistant fixture can withstand extreme physical and
environmental abuse and is ideal for retail centers, industrial parks,
schools and universities, public transit and airports, office buildings and
medical facilities. Mounting heights of 8 to 14 feet can be achieved.

Industry VP

The Industry series is a vaporproof fixture with a choice of mounting configurations designed to replace HID lighting systems up to 70w MH or HPS. This vapor resistant fixture can withstand extreme physical and environmental abuse and is ideal for retail centers, industrial parks, schools and universities, public transit, and airports, office buildings and medical facilities. Mounting height of 8 to 12 feet can be achieved.

Commerce Decor

The Commerce Decor is available in Type III and Type V distributions designed to replace HID lighting systems up to 250w MH or HPS. The fixture mounts to a pole top tenon. Typical area lighting applications include parking areas, walkways, and street lighting applications. Mounting heights of 12 to 20 feet can be used based on light level and uniformity requirements

Alume Light & Sign

The Alume Light & Sign is a UL listed exit sign in an Injection-molded thermoplastic ABS housing in white finish. This general purpose LED exit sign marks exits and hallways towards exits to guide occupants out of commercial and industrial buildings. Applications include Retail, Healthcare, Offices, Education, Commercial Buildings, and Warehouses.

Alume Light

The Alume Sign is a UL listed exit sign in an Injection-molded thermoplastic ABS housing in white finish. This general purpose LED exit sign marks exits and hallways towards exits to guide occupants out of commercial and industrial buildings. Applications include Retail, Healthcare, Offices, Education, Commercial Buildings, and Warehouses.

Alume Sign

Focus HTB

The Focus HTB is a third generation fixture designed for the harsh environments found in food processing and heavy manufacturing facilities. This industrial grade fixture is an ideal replacement for traditional 400W–1000W metal halide fixtures providing up to 70% energy savings. The IP67 waterproof rated fixture can operate in extreme temperature ranges.

Focus UHB

The Focus UHB LED luminaire provides controlled illumination for low bay and high bay lighting designed for the harsh environments found in food processing, warehousing, and heavy manufacturing facilities. The fixture utilizes high efficiency LED light sources to reduce maintenance and lower energy costs. The IP66 waterproof rated fixture can operate in extreme temperature ranges.

Focus WHB

The Focus WHB pendant, suspension, and ceiling mount linear LED luminaire provides controlled illumination for low bay and high bay lighting designed for the harsh environments found in food processing and heavy manufacturing facilities. The fixture utilizes high efficiency LED light sources to reduce maintenance and lower energy costs. The IP66 waterproof rated fixture can operate in extreme temperature ranges.

Focus TL

The Focus TL suspension and surface mount linear LED luminaire provides controlled illumination for general and task lighting designed for the harsh environments found in food processing and heavy manufacturing facilities. The fixture utilizes high efficiency LED light sources to reduce maintenance and lower energy costs. The IP66 waterproof design is an ideal task light to retrofit existing linear fluorescent as well as HID high-bay fixtures.

Focus LHB

The Focus LHB pendant and ceiling mount linear LED luminaire provides controlled illumination for general and task lighting designed for the harsh environments found in food processing and heavy manufacturing facilities. The fixture utilizes high efficiency LED light sources to reduce maintenance and lower energy costs. Mounting heights of 8 to 25 feet can be achieved
based on light level and uniformity requirements.

Alume LX C1D2 Linear

The Alume LX C1D2 Hazardous Linear uses an industrial grade die-cast ADC12 aluminum housing and anti-corrosion powdercoat in a IP66 design, which features high-performance illumination that lasts up to 100,000 hours. The system includes 10KV surge protection, a high efficacy and low decay 700 MA LED chip, and shock and vibration resistant tempered glass lens.
Replaces up to 250W MH/HPS in a retrofit environment.Iris EX Class 1, Division 2 Hazardous Location linear luminaire is designed to replace HID lighting systems from 100w to 400w HPS. Typical lighting applications include oil and gas, chemical, ocean, marine, aerospace, metal treatment, food, and alcohol industries. The fixture is designed for high humidity, high dust, high temperature, and vapor locations.

Architekt FC

LED Architekt FC Full CutOff Wall Pack can be widely used in indoor or outdoor lighting (wet location). Ideal for mechanical or electronic processing workshops, storage warehouses, steel mills, gas stations, toll booth, waiting rooms, the platforms of railway station, or indoor stadiums.

Alume WPS

Alume WPS LED slim wall pack is designed to replace traditional HID wall packs using well sealed die-cast aluminum housings and an impact resistant glass lens. The Alume is easy to install and includes 0-10V dimming, color tuning, and a photocell. Replace your MH /HPS wall packs up to 400W with the latest technology in lighting – the Alume WPS!

Alume FC

The Alume FC LED full cutoff wall pack has a powerful and efficient fin style heat sink, die cast aluminum alloy housing, and a anti-corrosion powdercoat finish. The luminaire has a 100,000 hour LED life and replaces traditional MH / HPS fixtures up to 400W, saving up to 80% energy. Be confidant in the Alume FC for its quality and durability, coupled with a 10 year warranty and DLC listing.

Xsite Bollard 17

Alume TP

The Alume TP Triproof Linear Strip has a beautiful round tube design for commercial applications. This fixture combines the latest in LEDtechnology with 130 Lm/W brightness, beautiful light distribution, a commercial grade optic lens, anti-corrosion paint, and surface mount brackets. Typical energy savings of 80% over traditional light sources. Ideal for replacing 80-200W MH/HPS.

Alume LS

The Alume LS Linear Strip has a beautiful round tube design for commercial applications. This fixture combines the latest in LEDtechnology with 130 Lm/W brightness, beautiful light distribution, a commercial grade optic lens and various installation types like surface mounting or chain hanging. Typical energy savings of 80% over traditional light sources. Ideal for replacing 130-200W MH/HPS.

Iris WP

The Iris WP LED wall pack offers maximum light output for general purpose area and security lighting through a classic polycarbonate refractor design. The wattage selectable feature allows the customer to use the same fixture in many different areas of the facility by simply selecting different outputs.

Performance M

Available with a variety of designated optic distributions, efficient Philips Lumileds LEDS, and powered by a Meanwell driver, this series offers superior quality of light and full flexibility optics for many exterior and interior lighting applications. Enjoy supreme long term reliability. This luminaire is a cutting edge innovation in design and performance. Thus, the Performance series!

Xsite Bollard 10

Iris LX C1D1

The Iris EX Class 1, Division 1 Hazardous Location flood light luminaire is designed to replace HID lighting systems from 100w to 400w HPS. Typical lighting applications include oil and gas, chemical, ocean, marine, aerospace, metal treatment, food, and alcohol industries. The fixture is designed for high humidity, high dust, high temperature, and vapor locations.

Focus Square Open Frame Bulkhead

LED Dimmable Focus Square Open Frame Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.

Focus Square Grid Frame Bulkhead

LED Dimmable Focus Square Grid Frame Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.

Focus Round Open Frame Bulkhead

LED Dimmable Focus Round Open Frame Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.

Focus Round Half Cutoff Bulkhead

LED Dimmable Focus Round Half Cutoff Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.

Focus Round Grid Bulkhead

LED Dimmable Round Grid Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.

Iris EX C1D2 Square

The Iris EX Class 1, Division 2 Hazardous Location flood light luminaire is designed to replace HID lighting systems from 100w to 1500w HPS. Typical lighting applications include oil and gas, chemical, ocean, marine, aerospace, metal treatment, food, and alcohol industries. The fixture is designed for high humidity, high dust, high temperature, and vapor locations.

Iris EX C1D1 Square

The Iris EX Class 1, Division 1 Hazardous Location flood light luminaire is designed to replace HID lighting systems from 250w to 400w HPS. Typical lighting applications include oil and gas, chemical, ocean, marine, aerospace, metal treatment, food, and alcohol industries. The fixture is designed for high humidity, high dust, high temperature, and vapor locations.

Iris Slim CP

The Iris Slim CP is specifically designed for garage and gas station lighting. By using a die cast aluminum alloy housing, anti-corrosion painting, and IP65 design, this fixture is great for MH / HPS garage and canopy lighting replacement. The completed LED canopy can work up to 100,000 hours, saving up to 80% energy, and have better lighting characteristics than a traditional metal halide lamp up to 250W.

Iris EX C1D1 Round

Architekt PTX

The Architekt PTX can be used for lawns, courtyards, pathways, roadways, and many other outdoor applicaitons. This LED post top light fixture, with its excellent optic design and die cast aluminum housing, is perfect for harsh environments. The patented cooling design aids in a LED Tj > 85C. Using Philips Lumileds LEDS and a Sosen driver, the quality is top notch.

Architekt RP

The Architekt RP can be used for lawns, courtyards, pathways, roadways, and many other outdoor applicaitons. This LED post top light fixture, with its excellent optic design and die cast aluminum housing, is perfect for harsh environments. The patented cooling design aids in a LED Tj > 85C. Using Philips Lumileds LEDS and a Sosen driver, the quality is top notch.

Architekt RW

The Architeckt roadway fixture can be widely used in outdoor lighting. Excellent for parking lots, municipal, DOT, industrial areas, residential, sidewalks, schools and local streets. Its excellent optic design, greatly improves the light utilization and distribution. The bottom door design with tooless entry is great for servicing below the fixture while still mounted on the pole.

Alume SC

The Alume SC is specifically designed for garage lighting. By using a die cast aluminum alloy housing, anti-corrosion painting, and IP65 design, this fixture is great for MH / HPS garage and canopy lighting replacement. The completed LED canopy can work up to 100,000 hours, saving up to 80% energy, and have better lighting characteristics than a traditional metal halide lamp up to 250W.

Alume MP

The Alume MP is specifically designed for wall mount LED entryway lighting. By using a die cast aluminum alloy housing, anti-corrosion painting, and IP65 design, this fixture is great for MH / HPS replacement. The completed LED canopy can work up to 100,000 hours, saving up to 80% energy, and have better lighting characteristics than a traditional metal halide lamp up to 100W.

« Older Entries