Round Tapered Smooth Direct Burial 18′ – 30′ Ships from DE
- Please refer to chart ordering guide on spec sheet for all models
- AVAILABILITY:
In stock and ships from DE
Pickup is available.
- Specifications and Features:
• 18’ to 30’ standard mounting heights
• For single or multiple luminaire mounting
• Luminaires may be mounted on tenons, brackets or shaft may be drilled to
manufacturer’s mounting specifications
- Shaft:
The shaft is extruded from new seamless 6061 alloy aluminum tubing and heat treated
to produce a T6 temper. All shafts are polished with fine grit aluminum oxide cloths,
resulting in a high quality, circumferential satin brushed finish. After finishing, each shaft is
wrapped for protection in shipment.
- Direct Embedment:
Unless otherwise specified, the length of the embedded section of a 4″ diameter is 3′,
5″ and 6″ shaft is 4′, and 7″ and 8″ shaft is 5′. A 1 ½” diameter grommet wire inlet hole
located 1′ 6″ below grade is included. The embedded section of the standard is coated
inside and outside with zinc-rich paint.
- Ground Lug:
The ground lug is a tab that is welded to the inside of the shaft, has a tapped ⅜” –16 hole
to accommodate the ground connector, and is located opposite the hand hole or wire
inlet hole.
- Tenons:
T300=Standard for post top (27/8” OD x 3” tall)
T355=Standard for shepherd’s crook arms (27/8” OD x 5.5” tall)
CAP=Removable cap, no tenon
- Finish – Super Durable Polyester TGIC Powder Coat:
• Standard finishes: high gloss black, textured black, high gloss white, medium bronze,
dark bronze, green, gray, silver metallic
• Custom and Marine-grade finishes are available. All RAL colors are available to
match (adder).
