Airport Lighting
Architekt GP
The Architekt GP solar LED post top luminaire is an all-in-one solution, with a low profile design and an integrated smart controller. This post top light fixture is ideal for parks, courtyards, villas, residences, pathways, and many other applications. It is designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times.
The Architekt GP can operate 3-5 continuous rainy days in Intelligent mode.
Alume BL
This attractive and newly redesigned bollard features an aluminum alloy housing. It provides corrosion and vandal resistance that is not only ideal for lighting pedestrial walkways, but also for accenting the exterior ground of office and apartment buildings, hotels and parks. A solid foundation and driver withstands the elements even in the worst weather conditions. Features a 360 degree surround lens, CCT selectable, and motion sensor.
Architekt OV
The Architekt OV solar LED post top luminaire is an all-in-one solution, with a low profile design and an integrated smart controller. This post top light fixture is ideal for parks, courtyards, villas, residences, pathways, and many other applications. It is designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times.
The Architekt OV can operate 3-5 continuous rainy days in Intelligent mode.
Architekt SP
The Architekt SP solar LED post top luminaire is an all-in-one solution, with a low profile design and an integrated smart controller. This post top light fixture is ideal for parks, courtyards, villas, residences, pathways, and many other applications. It is designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times.
The Architekt SP can operate 3-5 continuous rainy days in Intelligent mode.
Architekt RP
The Architekt RP solar LED post top luminaire is an all-in-one solution, with a low profile design and an integrated smart controller. This post top light fixture is ideal for parks, courtyards, villas, residences, pathways, and many other applications. It is designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times.
The Architekt RP can operate 3-5 continuous rainy days in Intelligent mode.
Architekt RB
The Architekt RB solar LED round bollard is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt RB has temperature compensation and lightning protection, reverse polarity protection and other functions such as light control, and lighting 3-5 during rainy days.
Architekt SB
The Architekt SB solar LED square bollard is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt SB has temperature compensation and lightning protection, reverse polarity protection and other functions such as light control, and lighting 3-5 during rainy days.
Architekt SW
The Architekt SW solar LED square wall mount light is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt SW has temperature compensation and lightning protection, reverse polarity protection andother functions such as light control, and lighting 3-5 during rainy days.
Architekt RW
The Architekt RW solar LED round wall mount light is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt RW has temperature compensation and lightning protection, reverse polarity protection and other functions such as light control, and lighting 3-5 during rainy days.
Architekt FC
The Architekt FC solar LED full cutoff wall mount fixture is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt FC has temperature compensation and lightning protection, reverse polarity protection and
other functions such as light control, and lighting 3-5 during rainy days.
Architekt SC
The Architekt SC solar LED semi-cutoff wall mount fixture is ideal for parks, courtyards, villas, residences, walls and many other applications. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge many times. The Architekt SC has temperature compensation and lightning protection, reverse polarity protection and
other functions such as light control, and lighting 3-5 during rainy days.
Architekt SR
The Architekt SR solar LED street light is an all-in-one solution, with a low profile design and an integrated smart controller. Designed for remote areas where no electricity needed. The deep cycle battery can charge and discharge over 500 times. The Architekt SR can operate 3-5 continuous rainy days in Intelligent mode.
Alume SR
The Alume SR solar LED street light is an all-in-one solution, with a low profile design, and an integrated photocell and motion sensor with smart controller. Designed for remote areas 12’ to 16’ in height, where no electricity needed. The deep cycle battery can charge and discharge over 500 times. The Alume SR can operate four continuous rainy days in Intelligent mode.
Twilight Z10
The Twilight Z10 offers IP69K high temperature and high pressure washdown that applies to even the most difficult applications such as wash bays, automated car washes, fountains, and other underwater applications. With a IK09 impact resitant grade aluminum alloy housing, Bayer PC tube, and a variety of CCT’s and beam angles, and adjustable mounting brackets, the Twilight Z10 shines above the rest.
Xsite Bollard 14
The Xsite series is a ARRA and BAA compliant bollard using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.
Industry Max
This LED high bay is designed for high ceiling industrial applications up to 80 feet that require maximum delivered footcandles with low maintenance and long life. The fixture is available in wide and narrow beam optics with a choice of lenses designed to replace HID lighting systems up to 1500w. Typical applications are high ceiling industrial, manufacturing, military and large aircraft hangar facilities.
Suitable for 40 to 80 foot mounting heights based on uniformity requirements.
Industry SQ
This LED high bay and aisle lighter is available with a choice of four lenses designed to replace HID lighting systems up to 1000w MH. Typical high bay lighting applications include warehouses, manufacturing facilities, gymnasiums, indoor sports facilities, and retail and big box store lighting. Suitable for 16 to 30 foot mounting heights based on light level and uniformity requirements.
Industry SQR
This LED low profile 16” high bay is available with a choice of five lenses designed to replace HID lighting systems up to 400w MH. Typical high bay lighting applications include warehouses, manufacturing facilities, gymnasiums, indoor sports facilities, and retail and big box store lighting. Suitable for 10 to 30 foot mounting heights based on light level and uniformity requirements.
Industry GC
The Industry series is a cutoff wall pack luminaire available with a choice of optical distributions designed to replace HID lighting systems up to 175w. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 15 feet can be achieved.
Axis 4
The Axis series is a Round Back Architectural Flood light luminaire available with a choice of knuckle or slip fitter mounting configurations, and a medium flood optical distribution designed to replace HID lighting systems up to 175w. Mounting can be accomplished using ground attachment accessories and to heights of 20 feet based on light level and uniformity requirements.
Axis 3
The Axis series is available with a choice of yoke or slip fitter mounting configurations and medium flood optical distribution designed to replace HID lighting systems up to 400w HID. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights up to 25 feet based on uniformity requirements.
Axis 2
The Axis series is available with a choice of knuckle or slip fitter mounting configurations and two optical distributions designed to replace HID lighting systems from 100w to 175w HID. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting up to heights of 20 feet based on light level and uniformity requirements.
Axis 1
The Axis series is available with a knuckle mounting configuration and medium flood distribution designed to replace HID lighting systems up to 100w MH or HPS. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished using ground attachment accessories to heights up to 16 feet.
Commerce SL
This luminaire is designed to replace HID lighting systems up to 70w HID. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished using ground attachment accessories and up to heights of 12 feet based on light level and uniformity requirements.
Multi GI HP
The Multi GI HP is a ARRA compliant multi-application luminaire using the latest Samsung LEDS. It is available with a wide choice of optical distributions designed to replace up to 1500w HID. Typical applications include auto dealerships, retail centers, industrial parks, schools, public transit and airports, office buildings and medical facilities. Mounting heights of 20 to 50 feet can meet requirements.
Multi GI
The Multi GI is available in two wattages with a wide choice of mounting configurations and optical distributions designed to replace HID lighting systems from 150w to 1000w MH or HPS. Typical applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 16 to 35 feet can be achieved.
Axis XP
The Axis series is a ARRA compliant flood/spot/wall luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.
Xsite Sconce
The Xsite series is a ARRA and BAA compliant wall sconce using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.
Focus FC
The Focus FC up and down architectural wall luminaire is available with an IES Type V distribution designed to replace HID lighting systems from 150w to 250w MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 12 to 20 feet can be used.
Axis Sconce
The Axis Sconce Series cutoff architectural wall mount provides controlled down lighting with a uniform distribution designed to replace compact fluorescent and HID lighting systems up to 50w MH or HPS. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports. Mounting heights of 8 to 12 feet can be used based on light level requirements.
Industry SC
The Industry series is a ARRA compliant wall mount luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.
Industry EL
The Industry series is a ARRA compliant wall mount luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.
Industry SR
The Industry series is a general purpose wall pack luminaire provides optically controlled wide spread light distribution designed to replace HID lighting systems up to 70w. Typical wall mounted lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings, apartment complexes and medical facilities. Mounting heights of 8 to 12 feet.
Axis Bullet Pendant
The Axis series is available with a swivel pendant and is designed with three optical outputs to replace HID lighting systems up to 100w. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished up to heights of 12 feet.
Design CN
The Design series is a vandal resistant garage lighter luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.
Design SB
The Design series canopy is available for surface or pendant mounting configurations with an optical distribution designed specifically to replace HID lighting systems up to 175w. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 12 to 20 feet can be achieved.
Architekt XP
The Architekt XP garage square luminaire with optional integral sensor is available in three wattages with an optical distribution designed to replace HID lighting systems up to 175w MH or HPS. Typical parking garage applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 16 feet can be used.
Design FT
The Design series is garage luminaire with optional integral sensor is available with an optical distribution designed to replace HID lighting systems up to 175w. Typical parking garage applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 8 to 16 feet can be achieved.
Axis Pillar Top
The Axis Pillar Top luminaires with UV-stabilized polycarbonate lenses and sealed optical compartments are designed to replace HID lighting systems up to 70w MH or HPS. These fixtures are designed for use on pillars, columns, fences, railings and other outdoor structures. Ideal for use in retail centers, schools and universities, office buildings, apartments and condominium complexes, and residential areas.
Axis Trail
The Axis Trail Series provides provides full cutoff lighting for outdoor path, walkways and landscape areas using wide spread optics designed to replace outdated Halogen and Compact Fluorescent lighting systems. These fixtures are ideal for retail centers, restaurants, hotels, schools and universities, public transit and airports, office buildings and medical facilities.
Axis Path
The Axis Path Series provides full cutoff lighting for outdoor path, walkways and landscape areas using wide spread optics designed to replace outdated Halogen and Compact Fluorescent lighting systems. When mounted on walls between 8 to 20 feet, the fixture provides accent wall wash pattern illumination. A stake mount version is also available for line or low voltage landscape accent lighting.
Axis Bullet C2
The Axis series flood light luminaire is available with a knuckle mounting feature and is designed to replace HID lighting systems up to 50w MH or HPS. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting up to heights of 12 feet based on light level and uniformity requirements.
Axis Bullet C1
The Axis series is available with a knuckle mount feature, swivel pendant, post top fitter or stake and is designed with three optical outputs to replace HID lighting systems up to 100w. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting can be accomplished up to heights of 12 feet.
Commerce Bell
The Commerce Bell Pendant is available in a Type V distribution with two lens options designed to replace HID lighting systems up to 250w MH or HPS. The fixture mounts to a pole single arm, pole double arm, or wall mount single arm. Typical area lighting applications include parking areas, walkways, and pedestrian public spaces. Mounting heights of 12 to 30 feet can be used based on light level and uniformity requirements.
Architekt RT
The Architekt RT architectural open large round post top is available in Type III or V distributions with two lens options designed to replace HID lighting systems up to 2500w MH or HPS. The fixture mounts to a pole top tenon. Typical area lighting applications include parking areas, walkways, and street lighting applications. Mounting heights of 12 to 20 feet can be used based on light level and uniformity requirements.
Focus Area
The Focus Area Series pole mount luminaire is available with clear or LumaLens lenses and open door frame designed to replace HID lighting systems up to 400w MH or HPS. Typical lighting applications include retail centers, industrial parks, schools and universities, public transit and airports, office buildings and medical facilities. Mounting heights of 18 to 30 feet can be used based on light level and uniformity requirements.
Architekt RP
The Architekt RP architectural pole or wall mount is available in Type II, III, IV or V distributions designed to replace HID lighting systems up to 400w MH or HPS. Typical area lighting applications include parking areas, walkways, and street lighting applications. Mounting heights of 12 to 30 feet can be used based on light level and uniformity requirements.
Architekt AR
The Architekt AR Architectural open small pole or wall mount is available in a Type V distribution designed to replace HID lighting systems up to 70w MH or HPS. Typical area lighting applications include parking areas, walkways, and street lighting applications. Mounting heights of 8 to 12 feet can be used based on light level and uniformity requirements.
Xsite Bollard AM4
The Xsite Bollard AM4 Series flat top with cone and a 270 degree glare shield, and are certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore, requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.
Xsite Bollard AM3
The Xsite Bollard AM3 Series round flat top with louvers and a 270 degree glare shield, and are certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore, requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.
Xsite Bollard AM2
The Xsite Bollard AM2 Series round dome top with cone and a 270 degree glare shield, and are certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore, requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.
Xsite Bollard AM1
The Xsite Bollard AM1 Series round dome top with louvers and a 270 degree glare shield, and are certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore, requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.
Commerce VSA
The Commerce VSA series is a wall and ceiling mount fixture with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be achieved.
Commerce VSS
The Commerce VSS series is a wall and ceiling mount fixture with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be achieved.
Industry CGA
The Industry CGA series is available with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be used based on light level and uniformity.
Industry GCA
The Industry GCA series is available with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be used based on light level and uniformity.
Axis XA1
The Axis XA1 series is available with a shielded IES Type II distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be used based on light level and uniformity.
Design FTA
The Design FTA series is available with a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC. Mounting heights of up to 12 feet can be used based on light level and uniformity.
Architekt AR
The Architekt AR series is available in three wattages with horizontal cutoff mounting configurations and a shielded IES Type V distribution, and is certified by the Florida Fish & Wildlife Conservation Commission (FWC) for wildlife applications that are directly visible from the shore requiring monochromatic AMBER light. LEDs operate between 585 and 595 nm, greater than 560nm required by FWC.
Array HBL
The Array HBL linear high bay is suitable for commercial, retail and institutional applications including gymnasiums, factories and warehouses. The wattage and CCT can be changed by a switch selection on the controller that provides quick and easy on-the-spot reconfiguring. The threaded conduit support wires coming from the knockout make for easier wire connections.
Array HBR
The Array HBR is a compact, round, budget-friendly high bay that combines great performance with premium aesthetics. The stylish exterior design is very adaptable and can be seamlessly integrated into various environments without being obtrusive. The unique structural design provides maximum durability and reliability, while supporting hook or pendant installation methods.
Twilight Z9 SC
The Twilight Z9 offers a basic solution that applies to even the most difficult applications. With a IK07 impact resitant grade aluminum alloy housing, tempered glass cover, IP66 waterproof rating, a variety of CCT’s and beam angles, and adjustable mounting brackets, the Twilight Z9 shines above the rest.
Commerce VP
The Commerce series is a vaporproof fixture with a choice of mounting
configurations designed to replace HID lighting systems up to 175w MH
or HPS. This vapor resistant fixture can withstand extreme physical and
environmental abuse and is ideal for retail centers, industrial parks,
schools and universities, public transit and airports, office buildings and
medical facilities. Mounting heights of 8 to 14 feet can be achieved.
Industry VP
The Industry series is a vaporproof fixture with a choice of mounting configurations designed to replace HID lighting systems up to 70w MH or HPS. This vapor resistant fixture can withstand extreme physical and environmental abuse and is ideal for retail centers, industrial parks, schools and universities, public transit, and airports, office buildings and medical facilities. Mounting height of 8 to 12 feet can be achieved.
Commerce Decor
The Commerce Decor is available in Type III and Type V distributions designed to replace HID lighting systems up to 250w MH or HPS. The fixture mounts to a pole top tenon. Typical area lighting applications include parking areas, walkways, and street lighting applications. Mounting heights of 12 to 20 feet can be used based on light level and uniformity requirements
Alume Light & Sign
The Alume Light & Sign is a UL listed exit sign in an Injection-molded thermoplastic ABS housing in white finish. This general purpose LED exit sign marks exits and hallways towards exits to guide occupants out of commercial and industrial buildings. Applications include Retail, Healthcare, Offices, Education, Commercial Buildings, and Warehouses.
Alume Light
The Alume Sign is a UL listed exit sign in an Injection-molded thermoplastic ABS housing in white finish. This general purpose LED exit sign marks exits and hallways towards exits to guide occupants out of commercial and industrial buildings. Applications include Retail, Healthcare, Offices, Education, Commercial Buildings, and Warehouses.
Alume Sign
The Alume Sign is a UL listed exit sign in an Injection-molded thermoplastic ABS housing in white finish. This general purpose LED exit sign marks exits and hallways towards exits to guide occupants out of commercial and industrial buildings. Applications include Retail, Healthcare, Offices, Education, Commercial Buildings, and Warehouses.
Focus HB
The Focus HB suspended LED high bay luminaire provides controlled illumination for general and task lighting designed for the harsh environments found in food processing and heavy manufacturing facilities. These high-quality durable fixtures are used in food and beverage processing, meat and poultry processing, livestock agricultural facilities, heavy industrial, and manufacturing facilities. Mounting heights of 16 to 40 feet can be used based on light level and uniformity requirements.
Architekt FC
LED Architekt FC Full CutOff Wall Pack can be widely used in indoor or outdoor lighting (wet location). Ideal for mechanical or electronic processing workshops, storage warehouses, steel mills, gas stations, toll booth, waiting rooms, the platforms of railway station, or indoor stadiums.
Alume WPS
Alume WPS LED slim wall pack is designed to replace traditional HID wall packs using well sealed die-cast aluminum housings and an impact resistant glass lens. The Alume is easy to install and includes 0-10V dimming, color tuning, and a photocell. Replace your MH /HPS wall packs up to 400W with the latest technology in lighting – the Alume WPS!
Alume FC
The Alume FC LED full cutoff wall pack has a powerful and efficient fin style heat sink, die cast aluminum alloy housing, and a anti-corrosion powdercoat finish. The luminaire has a 100,000 hour LED life and replaces traditional MH / HPS fixtures up to 400W, saving up to 80% energy. Be confidant in the Alume FC for its quality and durability, coupled with a 10 year warranty and DLC listing.
Xsite Bollard 17
The Xsite series is a ARRA and BAA compliant bollard using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.
Alume TP
The Alume TP Triproof Linear Strip has a beautiful round tube design for commercial applications. This fixture combines the latest in LEDtechnology with 130 Lm/W brightness, beautiful light distribution, a commercial grade optic lens, anti-corrosion paint, and surface mount brackets. Typical energy savings of 80% over traditional light sources. Ideal for replacing 80-200W MH/HPS.
Alume LS
The Alume LS Linear Strip has a beautiful round tube design for commercial applications. This fixture combines the latest in LEDtechnology with 130 Lm/W brightness, beautiful light distribution, a commercial grade optic lens and various installation types like surface mounting or chain hanging. Typical energy savings of 80% over traditional light sources. Ideal for replacing 130-200W MH/HPS.
Iris WP
The Iris WP LED wall pack offers maximum light output for general purpose area and security lighting through a classic polycarbonate refractor design. The wattage selectable feature allows the customer to use the same fixture in many different areas of the facility by simply selecting different outputs.
Performance M
Available with a variety of designated optic distributions, efficient Philips Lumileds LEDS, and powered by a Meanwell driver, this series offers superior quality of light and full flexibility optics for many exterior and interior lighting applications. Enjoy supreme long term reliability. This luminaire is a cutting edge innovation in design and performance. Thus, the Performance series!
Xsite Bollard 10
The Xsite series is a ARRA and BAA compliant bollard using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.
Focus Square Open Frame Bulkhead
LED Dimmable Focus Square Open Frame Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.
Focus Square Grid Frame Bulkhead
LED Dimmable Focus Square Grid Frame Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.
Focus Round Open Frame Bulkhead
LED Dimmable Focus Round Open Frame Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.
Focus Round Half Cutoff Bulkhead
LED Dimmable Focus Round Half Cutoff Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.
Focus Round Grid Bulkhead
LED Dimmable Round Grid Polycarbonate Lens 12.5” Bulkhead Luminaire The Focus series is a ARRA compliant bulkhead luminaire using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service. The Focus series LED bulkhead is designed to replace HID lighting systems up to 100w MH or HPS. The diffused polycarbonate lens allows for maximum light output. Typical applications include office and public buildings, condominiums, schools, shopping malls, and hospitality. Recommended mounting heights are 8 to 20 feet.
Architekt PTX
The Architekt PTX can be used for lawns, courtyards, pathways, roadways, and many other outdoor applicaitons. This LED post top light fixture, with its excellent optic design and die cast aluminum housing, is perfect for harsh environments. The patented cooling design aids in a LED Tj > 85C. Using Philips Lumileds LEDS and a Sosen driver, the quality is top notch.
Architekt RP
The Architekt RP can be used for lawns, courtyards, pathways, roadways, and many other outdoor applicaitons. This LED post top light fixture, with its excellent optic design and die cast aluminum housing, is perfect for harsh environments. The patented cooling design aids in a LED Tj > 85C. Using Philips Lumileds LEDS and a Sosen driver, the quality is top notch.
Architekt RW
The Architeckt roadway fixture can be widely used in outdoor lighting. Excellent for parking lots, municipal, DOT, industrial areas, residential, sidewalks, schools and local streets. Its excellent optic design, greatly improves the light utilization and distribution. The bottom door design with tooless entry is great for servicing below the fixture while still mounted on the pole.
Alume MP
The Alume MP is specifically designed for wall mount LED entryway lighting. By using a die cast aluminum alloy housing, anti-corrosion painting, and IP65 design, this fixture is great for MH / HPS replacement. The completed LED canopy can work up to 100,000 hours, saving up to 80% energy, and have better lighting characteristics than a traditional metal halide lamp up to 100W.
Architekt PT
The Architekt PT can be used for lawns, courtyards, pathways, roadways, and many other outdoor applicaitons. This LED post top light fixture, with its excellent optic design and die cast aluminum housing, is perfect for harsh environments. The patented cooling design aids in a LED Tj > 85C. Using Philips Lumileds LEDS and a Sosen driver, the quality is top notch.
Architekt HP
The Architekt HP can be used for lawns, courtyards, pathways, roadways, and many other outdoor applicaitons. This LED post top light fixture, with its excellent optic design and die cast aluminum housing, is perfect for harsh environments. The patented cooling design aids in a LED Tj > 85C. Using Philips Lumileds LEDS and a Sosen driver, the quality is top notch.
Architekt DD
The Architeckt dusk to dawn fixture can be widely used in outdoor lighting. Excellent for parking lots, municipal, DOT, industrial areas, residential, sidewalks, schools and local streets. Its excellent optic design, greatly improves the light utilization and distribution.
Architekt BL
Models VVDWSDBL25: 25W, 3360Lm Architekt round flat top LED bollard Energy-efficient Philips Lumileds SMD LEDS with high efficacy >135 Lm/W USA assembled product with quick warranty support In stock and ships from several U.S....
Alume WPR
Alume WPR LED wall pack is designed with rotatable light heads to adjust the the light output to the right spot. The Alume replaces traditional MH / HPS wall packs using well sealed die-cast aluminum housings and polycarbonate lenses. The Alume is easy to install and has a dimming function avaiable. Replace your MH / HPS wall packs up to 400W with the latest technology in lighting – the Alume WP!
Alume FL
By using a die cast aluminum alloy housing, anti-corrosion painting, and IP65 design, this fixture is great for MH / HPS outdoor flood lighting replacement. The completed LED flood light can work up to 100,000 hours, saving up to 80% energy, and have better lighting characteristics than a traditional metal halide lamp up to 150W.
Iris Pro C
The Iris Pro LED High bay is an affordable LED solution. It delivers comfortable and uniform lighting from mounting heights up to 33ft. It features a black die-cast aluminum housing. Dark powdercoat corrosion resistant finish provides long hours with a salt fog...
Iris EJ C1D1
The Iris EJ Class 1, Division 1 Hazardous Location jelly jar and spot light luminaire is designed to replace HID lighting systems up to 120w HPS. Typical lighting applications include oil and gas, chemical, ocean, marine, aerospace, metal treatment, food, and alcohol industries. The fixture is designed for high humidity, high dust, high temperature, and vapor locations.
Iris AR
Models VVDVNWS0NZ: 80W/100W/150W - Up to 21000 Lm VVDVNWS1NZ: 100W/150W/200W - Up to 28000 Lm VVDVNWS2NZ: 150W/200W/300W - Up to 42000 Lm Energy-efficient Philips Lumileds SMD LEDS with high efficacy >140 Lm/W In stock and...
Alume VP
The Alume VP vaportight series luminaire is a high performance LED lighting solution designed with optical versatility. Its rugged cast aluminum housing features an integral, watertight LED driver compartment and high performance aluminum heat sinks. Suitable for parking garages, or commercial, retail and institutional applications including gymnasiums, factories and warehouses.
Array BL
The Array BL Bollard series luminaire is a high performance LED lighting solution designed with optical versatility. Its rugged cast aluminum housing minimizes wind load requirements and features an integral, watertight LED driver compartment and high performance aluminum heat sinks. Suitable for building entryways, walking paths and pedestrian plazas, as well as any other location requiring a low-mounting-height light source.
Alume PT
The Alume PT post top LED luminaire has a beautiful low profile design with a die-cast alluminum alloy heatsink, high luminous efficiency of 130 Lm/W, high waterproof class LED driver and thermal mamagement. The Alume PT is ideal in replacing 80-400W Metal Halide with typical energy savings of up to 80%. The Alume PT is a perfect fit for gardens, walkways, parks, and landscape applications.
Xsite Bollard 6
The Xsite series is a ARRA and BAA compliant bollard using the latest Samsung LEDS. From benchmarking a minimum 104 degree F ambient during thermal testing, to custom designed LED arrays for each luminaire individually, to using the best housing materials and coatings, each aspect has been taken into careful consideration to ensure many years of trouble-free service.